null

Sonifex PS-SENDSCON Front panel kit

Sonifex

Write a Review
Price: $137.45
SKU:
SON-PS-SENDSCON
Condition:
New
Availability:
Item not stocked locally. Can usally ship in from the UK within 2-3 weeks.
Shipping:
Calculated at Checkout
More Info:
To convert PS-SEND To PS-SENDS
Product Link:
https://www.sonifex.co.uk/prostreamer/pssend.shtml
Manufacturers Part Number:
PS-SENDSCON
Adding to cart… The item has been added

Product Overview

PS-SENDSCON Front panel kit - (To convert PS-SEND To PS-SENDS)

The PS-SEND is a freestanding audio to IP converter which is also available in a 1U rack-mount as the PS-SENDS. It receives audio from a number of user selectable external stereo sources including balanced and unbalanced analogue audio, AES/EBU, S/PDIF & TOSlink digital audio. Once an audio source is selected, the unit encodes the audio in real time and sends it to the network as an encoded stream.  The audio stream can be distributed over an IP-based network to one or more PS-PLAY or PS-AMP units or other proprietary servers such as those for Icecast or Shoutcast.

All the configuration settings for the unit are accessed via a local web-server built into it. The type of encoding and the transport mechanism are defined by selecting the connection from a pre-defined list. The PS-SEND encodes an audio source into an MP3 (from analogue or digital inputs), G.711 or PCM (from analogue inputs only) audio stream using HTTP, RTP, raw UDP or raw TCP protocols, including multicast support and the following encoder types are available: Mpeg1 & 2 Layer3, MP3 CBR (constrant bit-rate), PCM linear and A-law, U-law, with 8kHz-48kHz sample rates . The unit can configure its own IP address using  DHCP/BOOTP, IPzator or AutoIP. A readout of the set IP address can be heard on every reset using SONICIP technology, if selected. Remote level monitoring is also possible using SNMP traps.

Two red and green front panel LEDs indicate what state the unit is currently in, be it normal operational mode or bootstrap mode, and also indicates the current network connection status. A blue LED denotes power to the unit. The input being routed to the IP stream can be monitored on the front panel ¼” (6.35mm) stereo jack socket in combination with a headphone volume knob.

The rear panel has 2 x RJ45 connectors, one for the 10/100Mbit Ethernet interface and one for GPI connections. The PS-SEND has 6 x GPIs which can be used to trigger the sending of the audio stream and which can also be used to trigger remote events using an output relay on the PS-PLAY and PS-AMP. There is a 9 way D-type RS232 serial connection for control of the unit by automation systems and firmware updates. The unit can be remote controlled via serial connection, TCP or UDP.

Power to the unit is via a universal supply 85V - 264V fused IEC mains socket.

For more information on the Sonifex PS-SENDSCON Front panel kit, click here!

Warranty Information

The Company agrees to repair or (at its discretion) replace Goods which are found to be defective (fair wear and tear excepted) and which are returned to the Company within the Warranty Term provided that each of the following are satisfied:
  1. (i) notification of any defect is given to the Company immediately upon its becoming apparent to the Purchaser;
  2. (ii) the Goods have only been operated under normal operating conditions and have only been subject to normal use (and in particular the Goods must have been correctly connected and must not have been subject to high voltage or to ionising radiation and must not have been used contrary to the Company's technical recommendations);
  3. (iii) the Goods are returned to the Company's premises at the Purchaser's expense;
  4. (iv) any Goods or parts of Goods replaced shall become the property of the Company;
  5. (v) no work whatsoever (other than normal and proper maintenance) has been carried out to the Goods or any part of the Goods without the Company's prior written consent;
  6. (vi) the defect has not arisen from a design made, furnished or specified by the Purchaser;
  7. (vii) the Goods have been assembled or incorporated into other goods only in accordance with any instructions issued by the Company;
  8. (viii) the defect has not arisen from a design modified by the Purchaser;
  9. (ix) the defect has not arisen from an item manufactured by a person other than the Company. In respect of any item manufactured by a person other than the Company, the Purchaser shall only be entitled to the benefit of any warranty or guarantee provided by such manufacturer to the Company.